Solar Charging Kit for RV, Marine
& Offgrid Cabin/Home
Enjoy FREE Fuel from the SUN!
Everything under SUN Fueled by SUN!
Package provides
charging power to your battery system, Upgradable
- Single or Dual Battery charging applications. This kit allows you to
install Solar Panels up to 15 feet away from the battery “upgrade up to 50
feet”. Common uses RV, Boat Remote home/cabin or any off grid application.
Simple & easy to install includes Peel & Stick Solar Panels.
All major components are
included in the kit and listed above, optional upgrades and add-ons are also
listed above, if you have questions or concerns or wish to discuss your
requirements please call us. Thank you for stopping by!
______________________________________________________________________
If you wish to upgrade this charging package -
selections of components should be as follows.
1. Choose number of panels.
2. Choose appropriate charge controller.
3. Choose extension cable length and quantity.
4. Choose combiner box & circuit breakers.
Charge controllers Options/Upgrades:
1.
SS-10-12v: Sunsaver 10 AMP 12V PWM
charge controller, will allow you to install Two 68 watt solar panels for the
total of 136 watts of power. Each panel upgrade will require additional PV
extension cable.
2.
SSD-25L: Sunsaver Duo 25 AMP 12V
is an advanced PWM Dual battery charger. Will allow two batteries to be charged
simultaneously with priority charge settings. Up to Four 68 watt solar panels
for the total of 272 watts of power, each panel upgrade will require additional
PV extension cable.
3.
PS30: Prostar 30 AMP 12v/24v
PWM charge controller, will allow you to
install Five 68 watt solar panels for the total of 340 watts of power, each
panel upgrade will require additional PV extension cable. This charge can
accept 12v or 24v DC from the solar panel and can charge 12v or a 24v battery
bank respectively.
4.
SS-MPPT-15L: 15 AMP MPPT (Maximum
Power Point Tracking) charge controller , will allow you to install Three 68
watt solar panels for the total of 204 watts of power, each panel upgrade will
require additional PV extension cable. This charge can accept up to 36 volts DC
from the solar panel and can charge 12v or a 24v battery bank. Increases
charging efficiency for 10% to 30%
Tristar
Advanced Charge Controllers
5.
TS45 &TS60: Tristar three function
charge controllers PWM or MPPT charge controller. provides reliable solar battery charging, load
control or diversion regulation. Approximate solar charging power Up to 748 watt for 12v
battery banks, 1496 watts (1.4KW) for 24v battery banks and 2992 watts (2.9KW) for 48v battery systems.
6.
MPPT: MPPT (Maximum Power
Point Tracking) advanced algorithm maximizes energy harvest, extremely high
reliability & very high efficiency, charges lower volt battery from a
higher volts solar array ie; solar array of 48 volt can charge a 12v battery
system. MPPT increases charging performance from 10% to 30%.
Solar Panel Options/Upgrades:
7.
PVL68: Unisolar PVL68 68 watt 12v DC Peel
& Stick Solar Panel Laminate. Includes 22” quick connect MC3 terminals
bypass diodes across every cell. Peel & stick mounting surfaces includes
metal, fibre glass, rubber or like surfaces. UL listed.
PV Extension Cable Options/Upgrades:
8.
MC3C-30: 30 feet PV extension
cable with MC3 connectors. Set of two 15' cable (MC3 connector on one end and
bare wire on the other end) or a single 30' cable (MC3 connector on each end)
9.
MC3C-50: 50 feet PV extension
cable with MC3 connectors. Set of two 25' cable (MC3 connector on one end and
bare wire on the other end) or a single 50' cable (MC3 connector on each end)
10.
MC3C-100: 100 feet PV extension
cable with MC3 connectors. Set of two 50' cable (MC3 connector on one end and
bare wire on the other end) or a single 100' cable (MC3 connector on each end)
Combiner
Box & Circuit Breakers:
11.
Baby Box: Four string baby
combiner box, will combine four positive inputs only.
12.
MNPV6: Six string combiner box,
will combine six positive strings and six negative strings includes grounding
lug.
13.
MNVP12: Twelve (6+6) string
combiner box, will combine twelve positive strings and twelve negative strings
includes 2 grounding lugs.
14.
MNEPV8/10: 8/10 Amp circuit
breaker. Each string will require one circuit breaker. String can consist of
one or more panels in series. Panels in parallel wiring will require one
circuit breaker per panel.